GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

Caution: Disconnect the power window switch when working inside the driver's door. When operated, the Express Down Feature allows the door window to drop very quickly, without stopping, which could cause personal injury.

  1. Remove the door trim panel. Refer to Door Trim Panel Replacement .

  2. Object Number: 1275116  Size: SH
  3. Remove the front door water deflector. Refer to Front Side Door Water Deflector Replacement .

  4. Object Number: 1325789  Size: SH
  5. Raise the window.

  6. Object Number: 956003  Size: SH
  7. Disconnect the electrical connector(s).
  8. Disconnect the mirror harness from the retainers.
  9. Lower the window.
  10. Remove the nuts from the power mirror studs.
  11. Remove the power mirror with the harness and gasket.

Installation Procedure

Caution: Disconnect the power window switch when working inside the driver's door. When operated, the Express Down Feature allows the door window to drop very quickly, without stopping, which could cause personal injury.


    Object Number: 956003  Size: SH
  1. Position the power mirror with the gasket and harness to the door.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the nuts to the power mirror.
  4. Tighten
    Tighten the power mirror nuts to 10 N·m (89 lb in).


    Object Number: 1325789  Size: SH
  5. Raise the window.
  6. Route the harness and secure the harness with the harness retainers.
  7. Connect the electrical connector(s).

  8. Object Number: 1275116  Size: SH
  9. Install the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
  10. Install the door trim panel. Refer to Door Trim Panel Replacement .