GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 SSR 🢒 Body 🢒 Instrument Panel, Gages, and Console 🢒 Radio Volume Compensator Interior Noise Microphone Replacement

Removal Procedure
  1. Remove the left knee bolster. Refer to Driver Knee Bolster Replacement in Instrument Panel, Gages, and Console.
  2. Remove the right knee bolster. Refer to Passenger Knee Bolster Replacement in Instrument Panel, Gages, and Console.

    3. Object Number: 1332733 Size: SH
  3. Disconnect the electrical connector.
  4. Remove the screws securing the microphone to the knee bolster.
  5. Remove the microphone.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1332733 Size: SH
  1. Locate the microphone to the knee bolster.
  2. Install the screws securing the microphone to the knee bolster.

    3. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  3. Connect the electrical connector.
  4. Install the right knee bolster. Refer to Passenger Knee Bolster Replacement in Instrument Panel, Gages, and Console.
  5. Install the left knee bolster. Refer to Driver Knee Bolster Replacement in Instrument Panel, Gages, and Console.