GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 SSR 🢒 Body 🢒 Instrument Panel, Gages, and Console 🢒 Front Floor Console Compartment Door Latch Replacement

Removal Procedure
  1. Remove the console compartment lid.

    2. Object Number: 1381752 Size: SH
  2. Remove the 6 screws retaining the lid to the armrest.

    3. Object Number: 1381755 Size: SH
  3. Remove the armrest pad from the compartment lid.

    4. Object Number: 1381751 Size: SH
  4. Remove the armrest latch and spring.

Installation Procedure

    Object Number: 1381751 Size: SH
  1. Position the armrest latch and spring to the console lid.

    2. Object Number: 1381755 Size: SH
  2. Install the armrest pad to the compartment lid.

    3. Object Number: 1381752 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the 6 screws retaining the lid to the armrest.

    4. Tighten
    Tighten the screws to 2.5 N·m (22 lb in).

  4. Close the console compartment lid.