GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2005
🢒
SSR
🢒
Body
🢒
Instrument Panel, Gages, and Console
🢒 Range Selector Lever Cable Adjustment
Ensure that the steering column shift lever and the transmission manual shaft lever are in the park position.
Raise the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
Pull back the white plastic cover (1) on the center connector.
Pull up on the center tabs of the lock button (2).
Important:
This step must be performed correctly to avoid a misadjusted cable.
Do not grasp the shift cable end (2) during this procedure.
Release the shift cable end (2) and allow the blue spring to tension/adjust the shift cable system.
Pull the white cover (3) on the shift cable end (1) back.
Push the natural colored lock button (2) down to engage the locking teeth on the shift cable end (1).
Release the white cover (1).
Verify the white cover (1) conceals the natural colored lock (2).
If the white cover (1) does not conceal the natural colored lock (2), the shift cable must be readjusted.
Test the transmission for proper shift operation.
If all of the gear positions cannot be achieved, the shift cable must be readjusted.