GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 SSR 🢒 Body 🢒 Interior Trim 🢒 Folding Top Rear Latch Striker Replacement - Upper

Removal Procedure

    Object Number: 1302512 Size: SH
  1. Cycle the folding top open 100 mm (4 in).
  2. Stop the folding top at this point.
  3. Remove the front headliner. Refer to Roof Retractable Front Headlining Trim Panel Replacement in Interior Trim.

    4. Object Number: 1311137 Size: SH
  4. Using a grease pencil or suitable marking device, mark the location of the folding top rear upper strikers to the folding top rear panel.

    5. Object Number: 1311145 Size: SH
  5. Remove the folding top rear upper striker fasteners.

    6. Object Number: 1311146 Size: SH
  6. Remove the folding top rear upper striker from the vehicle.

Installation Procedure

    Object Number: 1311146 Size: SH
  1. Install the folding top rear upper striker to the vehicle.

    2. Object Number: 1311145 Size: SH
  2. Install the folding top rear upper striker fasteners. Hand tighten only.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Align the folding top rear upper striker to the alignment marks.

    4. Tighten
    Tighten the folding top rear upper striker fasteners to 10 N·m (88 lb in).

  4. Install the front headliner. Refer to Roof Retractable Front Headlining Trim Panel Replacement in Interior Trim.
  5. Inspect the folding top for proper orientation. Refer to Power Folding Top Description and Operation .
  6. Cycle the folding top closed.