Removal Procedure
- Release the park brake.
- Remove the console assembly. Refer to
Console Replacement
in Instrument Panel, Gages, and Console.
- Remove the electrical connector for the park brake switch.
- Remove the retaining bolt.
- Remove the park brake switch.
Installation Procedure
- Position the park brake switch on the park
brake handle.
Notice: Refer to Fastener Notice in the Preface section.
- Install the park brake switch bolt.
Tighten
Tighten the park brake switch bolt to 4 N·m
(35 lb in).
- Install the electrical connector.
- Install the center console assembly. Refer to
Console Replacement
in Instrument Panel, Gages, and Console.