Removal Procedure
- Open the hood.
- Remove the powertrain control module (ECM). Refer to
Engine Control Module Replacement
in Engine Controls - 6.0L.
- Drain the washer solvent from the washer solvent container.
- Disconnect the washer pump electrical connector.
- Disconnect the washer hose from the washer pump.
- Using a small flat-bladed tool, remove the
washer pump from the washer solvent container.
Installation Procedure
- Position the washer pump to the washer solvent
container pressing in until fully seated.
- Connect the washer hose to the washer pump.
- Connect the washer pump electrical connector.
- Fill the washer solvent container with washer solvent.
- Install the powertrain control module (ECM). Refer to
Engine Control Module Replacement
in Engine Controls -
6.0L.
- Close the hood.