GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 SSR 🢒 Body 🢒 Wiring Systems 🢒 Mass Airflow Sensor with Intake Air Temperature Sensor Replacement

Removal Procedure

    Object Number: 1530323 Size: SH
  1. Open the hood.
  2. Remove the breather pipe from the air intake duct.

    3. Object Number: 1530328 Size: SH
  3. Remove the electrical connector for the mass air flow (MAF)/intake air temperature (IAT) sensor replacement.

    4. Object Number: 1530789 Size: SH
  4. Loosen the clamps on the air intake duct.
  5. Remove the air intake duct.

    6. Object Number: 1275969 Size: SH
  6. Remove the MAF/IAT (1) sensor and clamp (2) from the air cleaner assembly.

Installation Procedure

    Object Number: 1275969 Size: SH
  1. Install the MAF/IAT sensor (1) and clamp (2) in the air cleaner assembly.

    2. Object Number: 1530789 Size: SH
  2. Install the air intake duct and clamps.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Tighten all the clamps. Two clamps are shown, the rest are similar.

    4. Tighten
    Tighten the clamps to 4 N·m (35 lb in).


    Object Number: 1530328 Size: SH
  4. Install the electrical connector.

    5. Object Number: 1530323 Size: SH
  5. Install the breather pipe in the air intake duct.
  6. Close the hood.