GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 SSR 🢒 Body 🢒 Wiring Systems 🢒 Inflatable Restraint Seat Position Sensor Replacement

Removal Procedure
  1. Remove the seat from the vehicle. Refer to Seat Replacement in Seats.
  2. Ensure that the seat is in the full forward position.

    3. Object Number: 1200367 Size: SH
  3. Locate the seat position switch (3) under the seat on the inside of the inner seat rail.
  4. Disconnect the electrical connector (1) from the seat position switch (3).
  5. Remove the 2 nuts (2) that retain the seat position switch to the seat rail.
  6. Remove the seat position switch from the seat.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1200367 Size: SH
  1. Install the seat position switch  (3) to the seat rail with 2 nuts (2).

    2. Tighten
    Tighten the seat position switch nuts to 4 N·m (35 lb in).

  2. Connect the electrical connector (1) to the seat position switch (3).
  3. Install the seat in the vehicle. Refer to Seat Replacement in Seats.