GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the upper garnish molding. Refer to Rear Upper Garnish Molding Replacement in Interior Trim.
  2. Remove the lock pillar trim. Refer to Body Lock Pillar Trim Panel Replacement in Interior Trim.
  3. Remove the seat back bumper. Refer to Front Seat Back Cushion Bumper Replacement in Interior Trim.
  4. Fold the carpet forward to access the speaker fasteners.

  5. Object Number: 1344102  Size: SH
  6. Remove the speaker fasteners.
  7. Disconnect the electrical connector.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1344102  Size: SH
  1. Connect the electrical connector.
  2. Install the speaker fasteners.
  3. Tighten
    Tighten the fasteners to 2 N·m (18 lb in).

  4. Install the carpet.
  5. Install the seat back bumper. Refer to Front Seat Back Cushion Bumper Replacement in Interior Trim.
  6. Install the lock pillar trim. Refer to Body Lock Pillar Trim Panel Replacement in Interior Trim.
  7. Install the upper garnish molding. Refer to Rear Upper Garnish Molding Replacement in Interior Trim.