GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the engine sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .

  2. Object Number: 343699  Size: SH
  3. Disconnect the spark plug wire at each spark plug.
  4. • Twist each spark plug wire 1/2 turn.
    • Pull only on the boot in order to remove the wire from each spark plug.
  5. Disconnect the spark plug wire from the ignition coil.
  6. • Twist each spark plug boot 1/2 turn.
    • Pull only on the boot in order to remove the wires from the ignition coil.

Installation Procedure


    Object Number: 343699  Size: SH
  1. Install the spark plug wires at the ignition coil.
  2. Install the spark plug wire to each spark plug.
  3. Inspect the wires for proper installation:
  4. • Push sideways on each boot in order to inspect the seating.
    • Reinstall any loose boot.
  5. Install the engine sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .