GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the console assembly. Refer to Console Replacement in Instrument Panel, Gages, and Console.
  2. Remove the control lever handle. Refer to Control Lever Handle Assembly Replacement
  3. Remove the control lever boot/grommet.
  4. Remove the mounting bolts for the shift control.
  5. Remove the shift control assembly.

Installation Procedure

  1. Position the shift control assembly on the transmission.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the mounting bolts.
  4. Tighten
    Tighten the mounting bolts to 24 N·m (18 lb ft).

  5. Remove the control lever boot/grommet.
  6. Install the control lever handle. Refer to Control Lever Handle Assembly Replacement .
  7. Install the console assembly. Refer to Console Replacement in Instrument Panel, Gages, and Console.