GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Place the shifter in a position to gain easy access to the set screw.
  2. Remove the T-15 Torx ™ set screw.
  3. Remove the shifter knob.

Installation Procedure

  1. Install the shift knob on the shifter
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the T-15 Torx ™ set screw for the shifter.
  4. Tighten
    Tighten the T-15 Torx ™ set screw to 5 N·m (44 lb in).