Removal Procedure
- Remove the console assembly. Refer to
Console Replacement
in Instrument Panel, Gages and Console.
Important: Position the control lever in 3rd gear to gain access to the retaining bolts.
- Remove the retaining bolts for the control lever handle assembly.
- Remove the control lever handle assembly.
Installation Procedure
- Position the control lever handle on the shift control assembly.
Notice: Refer to Fastener Notice in the Preface section.
- Install the retaining bolts for the control lever handle.
Tighten
Tighten the retaining bolts to 25 N·m (18 lb ft).
- Install the console assembly. Refer to
Console Replacement
in Instrument Panel, Gages and Console.