GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the drive belt. Refer to Drive Belt Replacement - Accessory in Engine Mechanical - 6.0L.
  2. Remove the electronic control module (ECM) from the bracket and move to the side. Refer to Engine Control Module Replacement in Engine Controls - 6.0L.

  3. Object Number: 841009  Size: SH
  4. Remove the power steering pressure hose (1) from power steering pump (2).
  5. Remove the power steering pump return hose (3) from power steering pump (2).

  6. Object Number: 841012  Size: SH
  7. Remove the power steering pump mounting bolts (3).
  8. Remove the power steering pump (1).
  9. Remove the power steering pump pulley. Refer to Power Steering Pump Pulley Replacement .
  10. If applicable, remove the power steering pump reservoir. Refer to Power Steering Fluid Reservoir Replacement - Off Vehicle .

Installation Procedure

  1. If applicable, install the power steering pump reservoir. Refer to Power Steering Fluid Reservoir Replacement - Off Vehicle .
  2. Install the power steering pump pulley. Refer to Power Steering Pump Pulley Replacement .

  3. Object Number: 841012  Size: SH
  4. Align the power steering pump (1) with mounting bolt holes on the engine block (2).
  5. Notice: Refer to Fastener Notice in the Preface section.

  6. Install the power steering pump mounting bolts (3).
  7. Tighten
    Tighten the bolts to 25 N·m (18 lb ft).


    Object Number: 841009  Size: SH
  8. Attach the power steering pump return hose (3) to the power steering pump (2).
  9. Attach the power steering pump pressure hose (1) to the power steering pump (2).
  10. Tighten
    Tighten the fittings to 25 N·m (18 lb in).

  11. Install the ECM. Refer to Engine Control Module Replacement in Engine Controls - 6.0L.
  12. Install the drive belt. Refer to Drive Belt Replacement - Accessory in Engine Mechanical - 6.0L.
  13. Bleed the power steering system. Refer to Power Steering System Bleeding .