1. Remove the safety belt webbing anchor. Refer to Front Seat Belt Replacement .



2. Route the safety belt webbing anchor and webbing through the shoulder belt guide bracket.
3. Remove the folding top stowage compartment lid lock pillar muckets. Refer to Folding Top Stowage Compartment Lid Lock Pillar Muckets Replacement in Roof.



4. Remove the shoulder belt guide bracket fasteners (1).
5. Remove the shoulder belt guide bracket from the vehicle.

Notice: Follow the tightening sequence and procedure for the seat belt guide loop fasteners. If these steps are not followed, permanent vehicle body damage will occur.

1. Position the shoulder belt guide bracket to the vehicle body.



2. Finger tighten the 4 fasteners (1, 2, 3, 6).



3. Position the trim attachment bracket and finger tighten bolts (4, 5).

Notice: Refer to Fastener Notice in the Preface section.




4. In sequence per the number locations (1, 2, 3, 4, 5, 6), drive and tighten the shoulder belt guide bracket fasteners.

Tighten
Tighten the shoulder belt guide bracket fasteners to 25 N·m (18 lb ft).

5. Install the folding top stowage compartment lid lock pillar muckets. Refer to Folding Top Stowage Compartment Lid Lock Pillar Muckets Replacement in Roof.



6. Route the safety belt webbing anchor and webbing through the shoulder belt guide bracket.
7. Install the safety belt webbing anchor. Refer to Front Seat Belt Replacement .