GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 SSR 🢒 Preface 🢒 Cautions and Notices 🢒 Body Lock Pillar Trim Panel Replacement

Removal Procedure
  1. Remove the rear upper garnish molding. Refer to Rear Upper Garnish Molding Replacement .
  2. Remove the door sill plate. Refer to Door Sill Plate Replacement .

    3. Object Number: 1154051 Size: SH
  3. Pull the lock pillar trim forward to release the retainers.
  4. Remove the lock pillar trim.

Installation Procedure

    Object Number: 1154051 Size: SH
  1. Install the hinge pillar trim.
  2. Ensure the seat belt is not twisted.
  3. Install the door sill plate. Refer to Door Sill Plate Replacement .
  4. Install the rear upper garnish molding. Refer to Rear Upper Garnish Molding Replacement .