Voltmeter Gage
Delivered Torque Gage
Outside Temperature Gage
Your vehicle may have an auxiliary gage package located at the front of the center console.
Voltmeter Gage
This gage (A) is located on the left side of the gage package.
When your engine is not running, but the ignition is in RUN, this gage shows your battery's state of charge in DC volts.
When the ignition is on and the engine is running, the gage shows the condition of the charging system. Readings between the low and high warning zones indicate the normal operating range.
Readings in the low warning zone may occur when a large number of electrical accessories are operating in the vehicle and the engine is left at an idle for an extended period. This condition is normal since the charging system is not able to provide full power at engine idle. As engine speeds are increased, this condition should correct itself as higher engine speeds allow the charging system to create maximum power.
You can only drive for a short time with the reading in either warning zone. If you must drive while the gage is in the warning zone, turn off all unnecessary accessories.
Readings in either warning zone indicate a possible problem in the electrical system. Have the vehicle serviced as soon as possible.
Delivered Torque Gage
This gage (B) is located in the center of the gage package.
This gage displays the delivered torque for the vehicle.
Outside Temperature Gage
This gage (C) is located on the right side of the gage package.
This gage displays the outside temperature.
