HVAC Control Module Replacement. Chevrolet SSR 2006

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2006 🢒 SSR 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 HVAC Control Module Replacement

Callout	Component Name
Preliminary Procedure Remove the passenger knee bolster. Refer to Passenger Knee Bolster Replacement Disconnect the electrical connectors.
1	HVAC Control Module Screw (Qty: 4) Notice: Refer to Fastener Notice in the Preface section. Tighten 2 N·m (18 lb in)
2	HVAC Control Module Screw. Procedure The Mode, Recirculation and Temperature actuators must be reprogrammed. Refer to Actuator Recalibration. Tip Programming of the serviced HVAC Control Module is NOT necessary.

Callout

Component Name

HVAC Control Module Screw (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

HVAC Control Module Screw.

The Mode, Recirculation and Temperature actuators must be reprogrammed. Refer to Actuator Recalibration.

Tip
Programming of the serviced HVAC Control Module is NOT necessary.