GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 SSR 🢒 Body 🢒 Body Rear End 🢒 Endgate Latch Replacement

Removal Procedure
  1. Open the rear compartment lid.
  2. Lower the endgate.
  3. Remove the rear compartment endgate liner. Refer to Rear Compartment Endgate Liner Replacement .
  4. Remove the endgate access panel. Refer to Rear Compartment Endgate Access Panel Replacement .

    5. Object Number: 955734 Size: SH
  5. Remove the endgate latch fasteners.
  6. Remove the endgate latch from the vehicle.
  7. Remove the latch release rod from the latch.

Installation Procedure
  1. Install the latch release rod to the latch.

    2. Object Number: 955734 Size: SH
  2. Install the endgate latch into the endgate.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the endgate latch fasteners.

    4. Tighten
    Tighten the fasteners to 10 N·m (88 lb in).

  4. Install the rear compartment endgate access panel. Refer to Rear Compartment Endgate Access Panel Replacement .
  5. Install the rear compartment endgate liner. Refer to Rear Compartment Endgate Liner Replacement .
  6. Close the endgate.
  7. Close the rear compartment lid.