GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 SSR 🢒 Body 🢒 Interior Trim 🢒 Front Seat Back Cushion Bumper Replacement

Removal Procedure
  1. Remove the hinge pillar trim. Refer to Body Hinge Pillar Trim Panel Replacement .

    2. Object Number: 1362531 Size: SH
  2. Using a flat-bladed plastic tool, gently pry the fastener covers (1) from the seat back bumpers.
  3. Remove the seat back bumper nuts.
  4. Remove the seat back bumper.

Installation Procedure
  1. Install the seat back bumper on to the mounting studs.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the seat back bumper nuts.

    3. Tighten
    Tighten the nuts to 10 N·m (88 lb in).


    Object Number: 1362531 Size: SH
  3. Install the seat back bumper covers (1) on to the seat back bumper.