Removal Procedure
- Cycle the folding top stowage lid open. Leave the folding top latched
to the windshield header.
- Pull the weatherstrip away from the roof rear
panel.
- Remove the weatherstrip from the vehicle.
Installation Procedure
- Use Varnish Makers and Painters (VMP) naptha in order to remove all traces
of adhesive residue from the painted surfaces.
- Using a heat gun, heat the weatherstrip to 27-38°C
(80-100°F) for 5 minutes prior to installation.
- Align the weatherstrip to the roof rear panel.
- Push firmly to fully seat the weatherstrip to
the rear roof panel.
- Cycle the folding stop stowage lid closed.