Removal Procedure
- Open the door.
- Cycle the folding top open.
- Stop the cycle after the front panel is unlatched
from the windshield header.
- Grasp the weatherstrip at the bottom.
- Pull the weatherstrip away from the weatherstrip retainer
to remove from the vehicle.
- Remove the weatherstrip retainer fasteners.
- Remove the weatherstrip retainer from the vehicle.
Installation Procedure
- Install the weatherstrip retainer to the rear panel.
- Install the weatherstrip retainer fasteners. Tighten
until fully seated but not stripped.
- Align the weatherstrip to the rear panel.
- Install the weatherstrip into the weatherstrip retainer.
- Ensure that the weatherstrip is fully seated into the retainer.
- Cycle the folding top closed.
- Verify that the weatherstrip is fully seated to the front panel weatherstrip.
- Close the door.