Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

1. Open the hood.
2. Remove the windshield wiper arms. Refer to Windshield Wiper Arm Replacement in Wipers/Washer Systems.
3. Remove the push-in retainers from the air inlet grille, using the J 38778 .



4. Remove the air inlet grille from the vehicle.

Important: Inspect the position of the air inlet seal to the windshield. If not seated properly, reposition the air inlet grille as required.

1. Position the air inlet grille to the vehicle.
2. Install the push-in retainers to the air inlet grille.
3. Install the windshield wiper arms. Refer to Windshield Wiper Arm Replacement in Wipers/Washer Systems.
4. Close the hood.