Mode Valve Actuator Replacement for Chevrolet SSR 2006

1. Remove the HVAC module assembly. Refer to HVAC Module Assembly Replacement .
2. Remove the 3 mode actuator screws.
3. Remove the electrical connector from the mode actuator.
4. Remove the mode actuator.

1. Connect the electrical connector to the mode actuator.
2. Install the mode actuator.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the 3 screws to the mode actuator.

Tighten
Tighten the screws to 1.9 N·m (17 lb in).

4. Install the HVAC module assembly. Refer to HVAC Module Assembly Replacement .