GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 SSR 🢒 General Information 🢒 General Information 🢒 Rear Bumper Fascia Replacement

Removal Procedure
  1. Open the rear compartment lid.
  2. Lower the end gate.

    3. Object Number: 1255585 Size: SH
  3. Remove the rear compartment sill plate. Refer to Rear Compartment Sill Trim Plate Replacement in Body Rear End.

    4. Object Number: 955655 Size: SH
  4. Remove the rear fascia upper fasteners.
  5. Close the end gate.

    6. Object Number: 1255508 Size: SH
  6. Remove the rear wheelhouse retainers from the rear fascia.
  7. Disconnect the rear fascia wiring harness from the body side harness.

    8. Object Number: 1380590 Size: SH
  8. Remove the center brace support bracket bolt.

    9. Object Number: 955664 Size: SH
  9. Remove the rear fascia side attaching fasteners.

    10. Object Number: 955643 Size: SH
  10. Remove the rear fascia from the vehicle.

Installation Procedure

    Object Number: 955643 Size: SH
  1. Align the fascia to the body and install.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 955664 Size: SH
  2. Install the rear fascia side attaching fasteners.

    3. Tighten
    Tighten the fasteners to 6 N·m (53 lb in).

  3. Connect the rear fascia wiring harness to the body side harness.

    4. Object Number: 1255508 Size: SH
  4. Install the rear wheelhouse retainers into the rear fascia.

    5. Tighten
    Tighten the wheelhouse fasteners to 6 N·m (53 lb in).


    Object Number: 1380590 Size: SH
  5. Install the center brace support bracket bolt.
  6. Lower the end gate.

    7. Object Number: 955655 Size: SH
  7. Install the rear fascia upper fasteners.

    8. Object Number: 1255585 Size: SH
  8. Install the rear compartment sill plate. Refer to Rear Compartment Sill Trim Plate Replacement in Body Rear End.

    9. Tighten
    Tighten the rear fascia fasteners to 6 N·m (53 lb in).

  9. Close the end gate.
  10. Close the rear compartment lid.