GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Silverado Classic - 2WD 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Rear Side Access Door Trim Panel Replacement

Removal Procedure
  1. Remove the door handle bezel. Refer to Door Inside Handle Bezel Replacement .

    2. Object Number: 370139 Size: SH
  2. Remove the screws that retain the trim panel armrest.

    3. Object Number: 370137 Size: SH
  3. Insert a flat-bladed tool between the trim panel and the door in order to carefully pry the panel from the door.

Installation Procedure

    Object Number: 370137 Size: SH
  1. Install the trim panel to the door by pressing the panel edges until the panel is in place.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 370139 Size: SH
  2. Install the screws that retain the trim panel armrest.

    3. Tighten
    Tighten the trim panel armrest screws to 2 N·m (18 lb in).

  3. Install the door handle bezel. Refer to Door Inside Handle Bezel Replacement.