GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Silverado Classic - 2WD 🢒 Power and Signal Distribution 🢒 Wiring Systems and Power Management 🢒 Electronic Traction Control Switch Replacement

Removal Procedure
  1. Remove the instrument panel (I/P) bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .

    2. Object Number: 786376 Size: SH
  2. Gently lift the retaining tabs (2) and remove the stabilitrak switch (3) from the I/P assembly (1).

    3. Object Number: 788223 Size: SH
  3. Disconnect the harness connector from the stabilitrak switch.

Installation Procedure

    Object Number: 788223 Size: SH
  1. Connect the harness connector to the stabilitrak switch.

    2. Object Number: 786376 Size: SH
  2. Install the stabilitrak switch (3) into the I/P assembly (1)
  3. Ensure that the switch is secure into both retaining tabs (2).
  4. Install the I/P bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .