GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Silverado Classic - 2WD 🢒 Power and Signal Distribution 🢒 Wiring Systems and Power Management 🢒 Temperature Valve Actuator Replacement - Right Side

Removal Procedure
  1. Remove the I/P carrier. Refer to Instrument Panel Carrier Replacement .

    2. Object Number: 826718 Size: SH
  2. Disconnect the electrical connector (4) from the right air temperature actuator (3).
  3. Remove the screws from the right air temperature actuator (3).
  4. Remove the right air temperature actuator (3) from the HVAC module assembly (2).

Installation Procedure

    Object Number: 826718 Size: SH
  1. Install the right air temperature actuator (3) from the HVAC module assembly (2).

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the screws to the right air temperature actuator (3).

    3. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  3. Connect the electrical connector to the right air temperature actuator.
  4. Install the I/P carrier. Refer to Instrument Panel Carrier Replacement .
  5. Reprogram the air temperature actuator. Refer to Actuator Recalibration .