Fuel Level Sensor Replacement for Chevrolet Silverado - 2WD 2008

Fuel Level Sensor Replacement Cab/Chassis - Rear Tank

1. Remove the sending unit. Refer to Fuel Sender Assembly Replacement.
2. Disconnect the fuel level sensor electrical connector (1).
3. Remove the sensor retaining clip (3).
4. Squeeze the locking tangs (2) and remove the fuel level sensor.

1. Install the fuel level sensor.
2. Install the sensor retaining clip (3).
3. Connect the sensor electrical connector (1).
4. Install the sending unit. Refer to Fuel Sender Assembly Replacement.