Fuel Injection Fuel Feed Front Pipe Replacement - Left Side for Chevrolet Silverado - 2WD 2008

1. Remove the fuel return pipe to fuel injection pump fuel hose. Refer to Fuel Return Hose Replacement - Fuel Return Pipe to Fuel Injection Pump .
2. Loosen the left fuel rail fuel feed pipe fittings (1).




Important: Note the routing of the left fuel rail fuel feed pipe under the fuel feed and return pipes.

3. Remove the left fuel rail fuel feed pipe.

Important: Ensure that the routing of the left fuel rail fuel feed pipe is under the fuel feed and return pipes.

1. Position and install the left fuel rail fuel feed pipe.

Notice: Refer to Fastener Notice in the Preface section.




2. Tighten the left fuel rail fuel feed pipe fittings (1).

Tighten
Tighten the fittings to 41 N·m (30 lb ft).

3. Install the fuel return pipe to fuel injection pump fuel hose. Refer to Fuel Return Hose Replacement - Fuel Return Pipe to Fuel Injection Pump .
4. Prime the fuel system. Refer to Fuel System Priming .
5. Start the engine. If the engine stalls, repeat the above step.
6. Once the engine starts, inspect for fuel leaks.