1. Remove the transmission. Refer to Transmission Replacement.
2. Remove the clutch release bearing.

•	Rotate the bearing in either direction.

•	The compression spring load will push the release bearing off the end of the clutch actuator bearing.

Important: DO NOT use cleaners or chemicals to clean the quill and DO NOT grease the quill.

1. Using a clean dry cloth, clean the exposed area of the actuator cylinder quill.
2. Install the NEW clutch release bearing to the clutch actuator cylinder.

•	Firmly push the clutch release bearing into place.

•	The release bearing will snap over the retainer tab and will be self-retained to the actuator cylinder.

3. Install the transmission. Refer to Transmission Replacement.