GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Silverado - 2WD 🢒 Transmission/Transaxle 🢒 Manual Transmission - Tremec 5-Speed (TZ0) 🢒 Backup Lamp Switch Replacement

Removal Procedure

    Object Number: 772343 Size: SH
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Disconnect the backup lamp switch electrical connector (3).

    3. Object Number: 761484 Size: SH
  3. Remove the backup lamp switch.

Installation Procedure

    Notice: Refer to Component Fastener Tightening Notice in the Preface section.


    Object Number: 761484 Size: SH

    Important: The backup lamp switch has pre-applied thread sealant on the threads.

  1. Install the backup lamp switch.

    2. Tighten
    Tighten the switch to 37 N·m (27 lb ft).


    Object Number: 772343 Size: SH
  2. Connect the backup lamp switch electrical connector (3).
  3. Lower the vehicle.