GM Service Manual Online
For 1990-2009 cars only
Makes
›
Chevrolet
›
2009
›
Silverado - 2WD
›
Engine
›
Engine Mechanical - 4.3L
› Oil Filter Adapter Replacement
Search
Oil Filter Adapter Replacement for Chevrolet Silverado - 2WD 2009
Removal Procedure
Raise and suitably support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
Remove the oil pan drain plug and drain the oil into a suitable container.
Remove the oil filter.
Remove the oil filter adapter.
Installation Procedure
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the oil pan drain plug into the drain pan and tighten to
25 N·m (18 lb ft)
.
Install the oil filter adapter and tighten to
55 N·m (41 lb ft)
.
Install the oil filter and tighten to
30 N·m (22 lb ft)
.
Lower the vehicle.
Fill the engine with the proper quantity and quality of engine oil. Refer to
Approximate Fluid Capacities
.