Warning: If a window is cracked but still intact, crisscross the window with masking tape in order to reduce the risk of damage or personal injury.
Note: Before cutting out a window, apply a double layer of masking tape around the perimeter of the painted surfaces and interior trim.
- Remove the window lower garnish molding. Refer to
Rear Window Lower Garnish Molding Replacement.
- Remove both rear seat headrests (extended cab). Refer to
Head Restraint Replacement.
- Remove the rear sea (extended cab) only. Refer to
Rear Seat Replacement.
- Remove the rear sliding window regulator motor bolt , if equipped. Refer to
Rear Sliding Window Regulator Replacement.
Warning: If broken glass falls into the defroster outlets, it can be blown into the passenger compartment and cause personal injury.
- Cover to protect the following parts from broken glass:
| 5.2. | Defroster outlets and A/C outlets |
Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section.
Note: Keep the cutting edge of the tool against the window.
- This will allow the urethane adhesive to be separated from the window.
| • | Leave a base of urethane on the pinchweld flange. |
| • | The only suitable lubrication is clear water. |
- Open the window, if equipped.
- With the aid of an assistant, remove the window from the opening.
