Preliminary Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the lower stabilizer shaft link nuts. Refer to Stabilizer Shaft Link Replacement.

1

Rear Stabilizer Shaft Clamp Nut (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
32 N·m (24 lb ft)

2

Rear Stabilizer Shaft Insulator Clamp

3

Rear Stabilizer Shaft Insulator

Tip
Ensure that the slit in the insulator is facing the front of the vehicle when installed.