Shift Detent Lever Bearing Replacement. Chevrolet Silverado

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Silverado - 2WD 🢒 Transmission 🢒 Transfer Case - MP 1222/1225/1226-NQG 🢒 Shift Detent Lever Bearing Replacement

Callout

Component Name

•	Using the J 7079-2 , remove the bearings from the front case half.

•	Ensure the bearings are installed squarely into the bearing bores.

Transfer Case Shift Detent Lever Bearing - Inner

Tip

•	Ensure the printing on the bearing is facing upward.

•	Install the bearing using the long side of the DT-48215 .

•	Press the bearing until the tool bottoms on the front case half.

•	DT-48215 Shift Detent Lever Bearing Installer

•	J 7079-2 Universal Driver Handle - Non-Threaded

For equivalent regional tools, refer to Special Tools.

Transfer Case Shift Detent Lever Bearing - Outer

Tip

•	Ensure the printing on the bearing is facing upward.

•	Install the bearing using the short side of the DT-48215 .

•	Press the bearing until the tool bottoms on the front case half.

•	DT-48215 Shift Detent Lever Bearing Installer

•	J 7079-2 Universal Driver Handle - Non-Threaded