GM Service Manual Online
For 1990-2009 cars only

    Object Number: 1336108  Size: SH
  1. Install the exhaust manifold gasket.
  2. Install the exhaust manifold.

  3. Object Number: 1872440  Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the exhaust manifold bolts and nuts.
  5. Tighten
    Tighten the exhaust manifold bolts and nuts to 57 N·m (42 lb ft) in the proper sequence.

    Tighten
    Tighten the center exhaust manifold bolts and nuts an additional pass to 57 N·m (42 lb ft) in sequence.


    Object Number: 1336106  Size: SH
  6. Install the exhaust manifold heat shield.
  7. Install the exhaust manifold heat shield bolts.
  8. Tighten
    Tighten the exhaust manifold heat shield bolts to 10 N·m (89 lb in).