Backup Lamp Switch Replacement. Chevrolet Silverado

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2008 🢒 Silverado - 4WD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Backup Lamp Switch Replacement

Callout	Component Name
Preliminary Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
1	Backup Lamp Switch Notice: Refer to Component Fastener Tightening Notice in the Preface section. Procedure Disconnect the electrical connector from the backup lamp switch. Tighten: 28 N·m (21 lb ft)
2	Backup Lamp Switch Seal

Callout

Component Name

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

Backup Lamp Switch

Notice: Refer to Component Fastener Tightening Notice in the Preface section.

Disconnect the electrical connector from the backup lamp switch.

Tighten:
28 N·m (21 lb ft)

Backup Lamp Switch Seal