GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Silverado - 4WD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Engine Coolant Fan Motor Replacement

Engine Coolant Fan Motor Replacement Non-HP2

Removal Procedure

    Object Number: 1505517 Size: SH
  1. Remove the cooling blade(s). Refer to Engine Cooling Fan Replacement .
  2. Remove the cooling fan motor bolts.
  3. Remove the cooling fan motor(s).

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1505517 Size: SH
  1. Install the cooling fan motor(s).
  2. Install the cooling fan motor bolts.

    3. Tighten
    Tighten the bolts to 10 N·m (89 lb in).

  3. Install the cooling fan blades. Refer to Engine Cooling Fan Replacement .