GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 71484  Size: SH
  1. Remove the transmission. Refer to Transmission Replacement.
  2. Remove the clutch release bearing.
  3. • Rotate the bearing in either direction.
    • The compression spring load will push the release bearing off the end of the clutch actuator bearing.

Installation Procedure

Important: DO NOT use cleaners or chemicals to clean the quill and DO NOT grease the quill.


    Object Number: 71485  Size: SH
  1. Using a clean dry cloth, clean the exposed area of the actuator cylinder quill.
  2. Install the NEW clutch release bearing to the clutch actuator cylinder.
  3. • Firmly push the clutch release bearing into place.
    • The release bearing will snap over the retainer tab and will be self-retained to the actuator cylinder.
  4. Install the transmission. Refer to Transmission Replacement.