GM Service Manual Online
For 1990-2009 cars only

Object Number: 1670888  Size: MF

Callout

Component Name

Caution:  When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

Preliminary Procedure

  1. Disconnect the hood strut. Refer to Hood Strut Replacement .
  2. Remove the air inlet panel end panels. Refer to Air Inlet Grille Panel Replacement .

1

Hood Link Upper Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
25 N·m (18 lb ft)

Tip
Disconnect any electrical connectors before removing.

2

Hood Hinge Pivot Bolt (Qty: 2)

Tighten
25 N·m (18 lb ft)

3

Hood

Tip

    • Disconnect any electrical connectors before removing.
    • Transfer any parts as needed.