Sunroof Air Deflector Replacement Extended Cab
Removal Procedure
- Open the power sunroof window to the fully rear position.
- Remove the actuators screws (1) and actuators (2) from each side of the sunroof module.
- Remove the screws (1) attaching the sunroof air deflector (2) to the sunroof module (3).
- Slide the air deflector rearward until it releases from the sunroof module.
- Remove the sunroof air deflector (2) from the sunroof module (3).
Installation Procedure
Important: Transfer the air deflector parts to the new air deflector.
- Position the sunroof air deflector (2) to the sunroof module (3).
Notice: Refer to Fastener Notice in the Preface section.
- Install the screws (1) attaching the sunroof air deflector (2) to the sunroof module (3).
Tighten
Tighten the screws to 2 N·m (18 lb in).
- Install the actuators screws (1) and actuators (2) to each side sunroof module.
Tighten
Tighten the screws to 2 N·m (18 lb in).
- Verify that the spring action of the sunroof air deflector is operating.
- Close the sunroof window.
Sunroof Air Deflector Replacement Crew Cab
Callout
| Component Name
|
Preliminary ProcedureRemove the garnish molding. Refer to
Sunroof Panel/Window Garnish Molding Replacement
.
|
1
| Sunroof Air Deflector (Qty: 4)
Caution: Refer to Glass and Sheet Metal Handling Caution in the Preface section.
Procedure
- Open the sunroof to expose the 2 rivets located on each side.
- Tape off the under side of the sunroof track when drilling to prevent debris from entering the track.
- Drill out the rivets.
|
2
| Sunroof Air Deflector
ProcedureBefore cycling the sunroof, vacuum out the sunroof track to remove all debris.
|