Preliminary Procedures

1. Remove the front bumper impact bar. Refer to Front Bumper Impact Bar Replacement .
2. Remove the hood latch. Refer to Hood Primary and Secondary Latch Replacement .
3. Remove the radiator. Refer to Radiator Replacement .
4. Remove auto transmission cooler if equipped. Refer to Transmission Fluid Auxiliary Cooler Replacement .
5. Remove power steering cooler bolt and reposition.
6. Remove the A/C condenser. Refer to Air Conditioning Condenser Replacement .
7. Remove radiator air baffles.
8. Remove the washer bottle. Refer to Windshield Washer Solvent Container Replacement .
9. Remove front impact sensors.
10. Remove PCM bracket bolts and reposition.
11. Remove horn Horn Replacement - Left Side .
12. Disconnect ground from the frame if equipped.
13. Remove the grill mounting bracket. Refer to Hood Stop Bumper Bracket Replacement .
14. Unclip electrical harness from the radiator support.

1

Radiator Support Mount Nut (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
70 N·m (52 lb ft)

2

Radiator Support Mount Bolt (Qty: 2)

Tighten
70 N·m (52 lb ft)

3

Radiator Support

Tip
Transfer any parts as needed.