GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Silverado - 4WD 🢒 Engine 🢒 Engine Controls and Fuel - Hybrid (HP2) 6.0L (LFA) 🢒 Fuel Level Sensor Replacement

Removal Procedure

    Object Number: 1854514 Size: SH
  1. Remove the fuel tank module. Refer to Fuel Tank Fuel Pump Module Replacement.
  2. Disconnect the fuel level sensor wiring pigtail electrical connector (1) from the module cover.

    3. Object Number: 1854515 Size: SH
  3. Remove the fuel level sensor wiring pigtail from under the module clip (1).
  4. Gently push in the fuel level sensor retainers (2), disengaging them from the module reservoir.

    5. Object Number: 1854516 Size: SH
  5. Slide the fuel level sensor up, in order to remove the sensor from the module slot.

Installation Procedure

    Object Number: 1854516 Size: SH
  1. Position the fuel level sensor over the slot in the reservoir and slide the sensor down into the slot.

    2. Object Number: 1854515 Size: SH
  2. Ensure that the fuel level sensor retainers (2) engage the module reservoir.
  3. Install the fuel level sensor wiring pigtail under the module clip (1) behind the fuel pump wires.

    4. Object Number: 1854514 Size: SH
  4. Connect the fuel level sensor wiring pigtail electrical connector (1) to the module cover.
  5. Install the fuel tank module. Refer to Fuel Tank Fuel Pump Module Replacement.