GM Service Manual Online
For 1990-2009 cars only

    Warning: Refer to Safety Glasses Warning in the Preface section.


    Object Number: 188106  Size: SH

    Note: The balance shaft and the balance shaft front bearing are serviced only as an assembly. Do not remove the balance shaft front bearing from the balance shaft.

  1. Clean the following components in cleaning solvent:
  2. • The balance shaft (1)
    • The balance shaft retainer (2)
    • The balance shaft rear bearing
    • The balance shaft driven gear (4)
    • The balance shaft drive gear
  3. Dry the following components with compressed air:
  4. • The balance shaft (1)
    • The balance shaft retainer (2)
    • The balance shaft rear bearing
    • The balance shaft driven gear (4)
    • The balance shaft drive gear
  5. Inspect the balance shaft bearings for the following:
  6. • Front ball bearing for damage or wear
    • Front ball bearing for smoothness of operation
    • Rear sleeve bearing for wear, scoring, or other damage
  7. Inspect the balance shaft (1) for the following:
  8. • Wear or scoring on the rear bearing journal
    • Damaged bolt hole threads
    • Damage to the balance shaft driven gear locator pin
  9. Inspect the balance shaft retainer (2) for wear or damage.
  10. Inspect the balance shaft retainer bolts (3) for damaged threads.
  11. Inspect the driven gear (4) for the following:
  12. • Excessive wear or damage
    • Nicks, burrs, or scoring
  13. Inspect the driven gear bolt (5) for damaged threads.

  14. Object Number: 9848  Size: SH
  15. Inspect the balance shaft drive gear for the following:
  16. • Excessive wear or damage
    • Nicks, burrs, or scoring