GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Silverado - 4WD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Engine Coolant Fan Replacement

Engine Coolant Fan Replacement Non-HP2

Removal Procedure

    Object Number: 1505516 Size: SH
  1. Remove the cooling fan and shroud. Refer to Cooling Fan and Shroud Replacement .
  2. Remove the cooling fan blade retainers.
  3. Remove the cooling fan blades.

Installation Procedure

Important: The electric cooling fan assembly uses a 5-blade fan and a 7-blade fan. It does not matter which side the fan blades are installed on. DO NOT install two 5-blade assemblies or two 7-blade assemblies, as this would cause a noise issue.


    Object Number: 1505516 Size: SH
  1. Install the cooling fan blades.
  2. Install the cooling fan blade retainers.
  3. Install the cooling fan and shroud. Refer to Cooling Fan and Shroud Replacement .