Air Conditioning (A/C) Refrigerant Pressure Sensor Replacement Non-HP2

Special Tools

J 39400-A Halogen Leak Detector

1. Disconnect the electrical connector from the A/C refrigerant pressure sensor.
2. Remove the A/C refrigerant pressure sensor (1) from the condenser tube.

Caution: Refer to Fastener Caution in the Preface section.




1. Install the A/C refrigerant pressure sensor (1).

Tighten
Tighten the switch to 6 N·m (53 lb in).

2. Connect the electrical connector to the A/C refrigerant pressure sensor.
3. Leak test the fittings of the components using the J 39400-A .
4. Lower the vehicle.