GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Silverado - 4WD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Rear Door Lock Replacement

Rear Door Lock Replacement Crew Cab


Object Number: 1673114 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Position the door window as needed for service.
  2. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement.
  3. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement.

1

Inside Door Handle Cable Retainer Clip

2

Rear Side Door Lock Screw (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Procedure

  1. Release the outside door handle rod from the door lock clip.
  2. The mandatory sequence is 3, 1, 2.

Tighten
10 N·m (89 lb in)

3

Rear Side Door Lock

Procedure

  1. Disconnect the electrical plug.
  2. Transfer all parts to the new lock.

Rear Door Lock Replacement Extended Cab Upper

Removal Procedure
  1. Open the rear side door.
  2. Remove the rear side door trim panel. Refer to Rear Side Access Door Trim Panel Replacement.

    3. Object Number: 1830447 Size: SH
  3. Remove the screws (1) retaining the upper latch to the rear side door.
  4. Disconnect the upper latch cable (2) from the latch by releasing the retaining clip.
  5. Remove the upper latch (3) from the rear side door.

Installation Procedure

    Object Number: 1830447 Size: SH
  1. Install the upper latch (3) to the rear side door.
  2. Connect the upper latch cable (2) to the latch using the retaining clips.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Loosely install the screws (1) retaining the upper latch to the rear side door.

    4. Tighten
    Tighten the lower rear side door upper latch bolts (1) until the latch bracket is flush to the door panel.

  4. Close the rear side door to self align the upper latch.
  5. Finish tightening the lower rear side door upper latch bolts.

    6. Tighten
    Tighten the upper latch bolts to 9 N·m (80 lb in).

  6. Open the rear side door.
  7. Install the rear side door upper latch bolt (1).

    8. Tighten
    Tighten the upper latch bolt to 9 N·m (80 lb in).

  8. Install the rear side door trim panel. Refer to Rear Side Access Door Trim Panel Replacement.
  9. Close the rear side door.

Rear Door Lock Replacement Extended Cab Lower


Object Number: 1830443 Size: MF

Callout

Component Name

Warning: Refer to SIR Warning in the Preface section.

Preliminary Procedures

  1. Position the door window as needed for service.
  2. Remove the rear door trim panel. Refer to Rear Side Access Door Trim Panel Replacement.
  3. Remove the rear door water deflector.

1

Rear Side Door Lower Latch Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (89 lb in)

2

Rear Side Door Lower Latch Cable

Procedure

Pull the latch downward out of the door and disconnect the cable from the clip.

3

Rear Side Door Lower Latch