Tail Lamp Replacement. Chevrolet Silverado

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Silverado - 4WD 🢒 Body Systems 🢒 Lighting 🢒 Tail Lamp Replacement

Tail Lamp Replacement Chevrolet

Callout	Component Name
Preliminary Procedure Open the endgate in order to access the tail lamp assembly screws.
1	Tail Lamp Assembly Screw (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tighten 2 N·m (18 lb in)
2	Tail Lamp Wiring Harness Assembly Connector
3	Tail Lamp Assembly Tip Upon installation, push inward on the tail lamp in order to seat the 2 locating pins in the body panel.

Callout	Component Name
Preliminary Procedures Open the endgate in order to access the tail lamp assembly screws. Disconnect the electrical harness to the tail lamp.
1	Tail Lamp Assembly Screws (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tighten 2 N·m (18 lb in)
2	Tail Lamp Assembly Tip Upon installation, push inward on the outer edge of the tail lamp in order to seat the 2 locating pins in the body panel.

Callout

Component Name

Tail Lamp Assembly Screws (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

Tail Lamp Assembly

Tip
Upon installation, push inward on the outer edge of the tail lamp in order to seat the 2 locating pins in the body panel.